About This Manual; Reporting Comments Or Suggestions Concerning This Manual; Conventions And References; Metric Conversion - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710 Broadcast Satellite Modem
Preface
For Online Customer Support:
An RMA number request can be requested electronically by contacting the Customer Support
Department through the online support page at
on "Return Material Authorization" for detailed instructions on our return
Click
procedures.
on the "RMA Request Form" hyperlink, then fill out the form completely before
Click
sending.
Send e-mail
For information regarding this product‟s warranty policy, refer to the Warranty Policy, p. xvi.

About this Manual

This manual provides installation and operation information for the Comtech EF Data CDM-710
Broadcast Satellite Modem. This is a technical document intended for earth station engineers,
technicians, and operators responsible for the operation and maintenance of the CDM-710.

Reporting Comments or Suggestions Concerning this Manual

Comments and suggestions regarding the content and design of this manual will be appreciated.
To submit comments, please contact the Comtech EF Data Technical Publications Department:
techpub@comtechefdata.com.

Conventions and References

Metric Conversion

Metric conversion information is located on the inside back cover of this manual. This
information is provided to assist the operator in cross-referencing non-metric to metric
conversions.

Cautions and Warnings

CAUTION
WARNING
to the Customer Support Department at
CAUTION indicates a hazardous situation that, if not avoided, may
result in minor or moderate injury. CAUTION may also be used to
indicate other unsafe practices or risks of property damage.
WARNING indicates a potentially hazardous situation that, if not
avoided, could result in death or serious injury.
www.comtechefdata.com/support.asp
service@comtechefdata.com
xii
Revision 9
MN/CDM710.IOM
:
.