Comtech EF Data CDM-710 Installation And Operation Manual page 176

CDM-710 Satellite Modulator
Remote Control
Command
Parameter (Instruction for Command
Type Code and
Qualifier)
Tx ASI TAB= 2 bytes
Bandwidth
Tx Interface TIP= 2 bytes
Port
Tx Data Invert TDI= 2 bytes
Arguments
Description of Arguments
or Response
to Query
Tx ASI Bandwidth, where:
s=Defines which interface slot (1 or 2)
x=Defines ASI Bandwidth, where:
0=Wide
1=Narrow
Example: TAB=11 (selects Narrow bandwidth )
Indicates which port on the interface is to be used (ASI card
only), in the form: sp
Where:
s = interface slot (1 to 2)
p = interface port/channel (1 to 4)
1 = J4
2 = J5
Example: TIP=11 ( selects port J4 on interface slot 1 )
Invert Transmit Data, where:
s=Defines which interface slot ( 1 or 2 )
x=Invert Transmit Data, where:
0=Normal
1=Inverted
(Note: Command valid Only with HSSI)
Example: TDI = 111 (selects Inverted TX Data)
Response
to
Command
TAB=
TAB?
TAB*
TAB#
TIP=
TIP?
TIP*
TIP#
TDI =
TDI?
TDI *
TDI #
A–14
Revision 9
MN/CDM710.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
TAB?s TAB=sx
TIP?s TIP=sp
TDI?sc TDI =sx
(see description of
arguments)