Comtech EF Data CDM-710 Installation And Operation Manual page 175

CDM-710 Satellite Modulator
Remote Control
Command
Parameter (Instruction for Command
Type Code and
Qualifier)
Tx Frame Size TFS= 1 byte
Tx Pilot On/Off TPI= 1 byte
Tx Location of TLP= 1 byte
the Pilot
Tx Spectrum TSI= 1 byte
Invert
Arguments
Description of Arguments
or Response
to Query
Tx Frame Size Long/Short selection, where:
0=Short,
1=Long
Example: TFS =0 (which is Short Frame Size)
*NOTE: Setting only valid in DVB-S2 mode.
Tx Pilot On/Off selection, where:
0=Off,
1=On
Example: TPI=0 (which is Pilot Off)
*NOTE: Only valid in DVB-S2 mode.
Tx Pilot On/Off selection, where:
0=Average,
1=Peak
Example: TLP=0 (which is Pilot Average)
*NOTE: Only valid in DVB-S2 mode.
Tx Spectrum Invert selection, where:
0=Normal
1=Tx Spectrum Inverted
Example: TSI=0 (which is normal)
Response
to
Command
TFS =
TFS?
TFS *
TFS #
TPI=
TPI?
TPI*
TPI#
TLP=
TLP?
TLP*
TLP#
TSI=
TSI?
TSI*
TSI#
A–13
Revision 9
MN/CDM710.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
TFS? TFS =x
TPI? TPI=x
TLP? TLP=x
TSI? TSI=x