Comtech EF Data CDM-710 Installation And Operation Manual page 206

CDM-710 Satellite Modulator
Remote Control
Command
Parameter (Instruction for Command
Type Code and
Qualifier)
Redundancy RED= 1 byte, value
State of 0 or 1
Arguments
Description of Arguments
or Response
to Query
Unit returns the redundancy state of the unit, where:
0 = Offline
1 = Online
*** This command can be used to force the unit offline, this is
done by sending RED=0. This is only valid if redundancy mode
is enabled. If redundancy is not enabled, then RED=0 will return
an error. The unit cannot be forced online.
*** If the unit is not in redundancy mode, then the unit will
always be online.
Example: RED=0 (force unit offline)
Response
to
Command
RED=
RED?
RED*
RED#
A–45
Revision 9
MN/CDM710.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
RED? RED=x
(see description of
arguments)