Comtech EF Data CDM-710 Installation And Operation Manual page 70

CDM-710 Broadcast Satellite Modem
Front Panel Operation
Ena/Dis
If is selected:
Intfc2 Egress Enable:
Enable Disable
Enable
Enter
enable also enables transmission of the IP-encapsulated MPEG packets to the LAN (egress).
Disable
Entering
FEC
If is selected:
Intfc2 FEC:
Ena/Dis Matrix
This menu allows enabling and configuration of the SMPTE 2022 / Pro-MPEG COP3 FEC
stream to the LAN.
Ena/Dis
If is selected:
Intfc2 Egress FEC:
Enable Disable
Enable
Enter
addition to the stream of IP-encapsulated MPEG packets. Enter
generation of FEC packets to the LAN.
Matrix
If is selected:
Intfc2 Egress FEC Matrix:
Length = 10,
Configure the dimension of the egress FEC matrix. Valid values for L and D are as follows:
IP
If is selected:
Intfc2 Egress IP:
Group SrcPort DestPort
This menu allows configuration of IP header fields for the egress packets.
to enable reception of the MPEG transport stream from the WAN. Entering
turns off egress packets to the LAN.
( E)
to generate SMPTE 2022 / Pro-MPEG COP3 FEC IP packets to the LAN, in
Depth = 10

L * D </= 100

1 </= L </= 20

4 </= D </= 20
Disable
5–30
Revision 9
MN/CDM710.IOM
to run off the