Opening Screen; Main Menu - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710 Broadcast Satellite Modem
Front Panel Operation
5.2

Opening Screen

This screen is displayed whenever power is first applied to the unit:
CDM-710 MODEM
Firmware Version: X.X.X
The bottom line displays the internal software version. Press ENTER to go to the Main Menu
screen.
The unit being tested could be CDM-710 or CDM-710L. For purposes
of this documentation a CDM-710 was used.
IMPORTANT
5.3

Main Menu

SELECT: Config
Test Info Save/Load Util
The following choices are presented:
Config
Monitor
Test
Info
Save/Load
Util
Monitor
The Config menu provides the user selections for the desired
Interface, Transmit, and Receive operations
Permits the user to monitor the alarm status of the unit, to view the log
of stored events, and to display the Receive Parameters screen.
Permits the user to configure the modem into one of several Test
modes, example: CW and Loopback
The INFO menu provides a summary/display of the Interface,
Transmit, Receive, and M&C configurations.
Permits the user to save and retrieve up to 10 different modem
configurations.
Permits the user to perform miscellaneous functions, such as setting
the Real-Time Clock, adjusting the display brightness, etc.
5–5
Revision 9
MN/CDM710.IOM