39
Commissioning
To open specific parameterization dialogs for the I/O module 750-597, proceed as
follows:
1.
If enabled, disable Monitor or Control mode. Click the respective button in
the toolbar, so that it is no longer highlighted.
This step is unnecessary if configuring for the first time.
Click the I/O module and then the Settings button.
2.
Or:
Right-click on the I/O module and then click the Settings menu item (see
the figure below).
Figure 12: WAGO-I/O-CHECK User Interface
The parameterization dialog appears, which forms the basis for the following
description. This forms the basis for the subsequent explanation.
Manual
Version 1.0.0
WAGO-I/O-SYSTEM 750
750-597 8AO 0-10V/±10V DC