Table of Contents
Advertisement
2.5.3 USB interface
The AP 1000 display units with 10.4", 12.1" (only 4:3 format), 15" and 19" display sizes are equipped with a USB
2.0 interface on the front. This is equipped with a USB interface cover. IP65 protection (front) is only provided if
the USB interface cover is installed correctly.
Warning!
Peripheral USB devices can be connected to the USB interfaces on this device. Due to the large number
of USB devices available on the market, B&R cannot guarantee their performance. All USB devices
provided by B&R are guaranteed to function properly.
Caution!
Because this interface is designed according to general PC specifications, extreme care should be
exercised with regard to EMC, cable routing, etc.
Front USB
The front USB interface is available to the user for service purposes.
Type
Design
Transfer rate
Current load
2)
Front USB
Cable length
USB 2.0
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering may differ from that used by
the particular operating system.
2)
The USB interface is protected by a maintenance-free "USB current-limiting circuit breaker" (max. 500 mA).
Panel PC 2100 user's manual V1.11
Universal Serial Bus (front USB)
USB 2.0
Type A
Low speed (1.5 Mbit/s), full speed
(12 Mbit/s), high speed (480 Mbit/s)
Max. 500 mA
Max. 5 m (without hub)
Table 46: Front USB interface
Technical data • Complete system
1)
1x USB type A, female
Front USB interface
53
Advertisement
Table of Contents
