Table of Contents
Advertisement
Technical data • Complete system
2.5.2 Key and LED configuration
Each button and LED can be individually configured and adapted directly to the application. Various B&R tools
are available for this:
• B&R Key Editor for Windows operating systems
• Visual Components for Automation Runtime
Keys and LEDs from each device are processed by the matrix controller in a bit string of 128 bits each.
The positions of keys and LEDs in the matrix are shown as hardware numbers. These hardware numbers can be
read directly from the target system using the B&R Key Editor or B&R Control Center.
Figure 21: Hardware numbers in the B&R Key Editor and B&R Control Center
The images below show the positions of buttons and LEDs in the matrix. This information is indicated as follows.
Hardware number of key
5AP1151.0573-000
50
Hardware number of key
Key without LED
Figure 22: Display - Keys and LEDs
Figure 23: 5AP1151.0573-000 - Key and LED configuration
Hardware number of LED
Key with LED
Hardware number of LED
LED
Panel PC 2100 user's manual V1.11
Advertisement
Table of Contents
