PVT SYSTEM
DRIVEN CLUTCH SERVICE (2014-2015)
DRIVEN CLUTCH DISASSEMBLY
1. Remove driven clutch from the transmission input
shaft. Do NOT attempt disassembly of the driven
clutch from the outside snap ring
clutch must be disassembled from the helix side.
If driven clutch is difficult to remove, use 2871056
Driven clutch puller to remove driven clutch.
2. It is important to mark the position of the shaft, cam
cover and sheave with a grease marker or tape
before disassembly or use the X's on the components
for reference. This will aid in assembly and maintains
clutch balance.
5.30
q
. The driven
NOTE
3. Remove the four screws
(helix) assembly using a T25 Torx driver.
4. Place the driven clutch into the Universal Clutch
Compressor.
Universal Clutch Compressor: PU-50518-A
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
w
that secure the cam
© Copyright Polaris Industries Inc.