Engine Crankcase Breather Hose Inspection - Polaris RZR XP 1000 2014 Service Manual

MAINTENANCE
11. Remove oil fill cap (see Chapter 2 – Engine Oil
Level, page 2.10). Fill engine with 2.5 quarts (2.4 L)
of recommended engine oil.
FLUID CAPACITY
Recommended Engine Oil:
Capacity:
3.0 qt (2.8 L)
PS-4 Full Synthetic 5W-50
Ambient Temp Range: -35° F to 100° F
PS-4 Extreme Duty
Ambient Temp Range: 0° F to 120° F
12. Verify the transmission is still in PARK.
13. Start the engine and allow it to idle for 30 seconds.
14. Stop the engine and inspect for oil leaks. Wait at
least 15 seconds before removing the dipstick.
15. Unlock the dipstick lever. Remove the dipstick and
wipe it dry with a clean cloth (see Chapter 2 – Engine
Oil Level, page 2.10).
16. Reinstall the dipstick and push it into place. Do not
lock the dipstick
Make certain the dipstick is inserted all the way into the
dipstick tube to keep the depth of the dipstick
consistent.
17. Remove the dipstick and check the oil level.
18. Add the recommended oil as necessary to bring the
oil level within the SAFE range on dipstick. Do not
overfill.
19. When finished, reinstall the oil fill cap, oil dipstick and
lock the lever.
20. Reinstall the cargo box access panel, engine service
panel and seats.
21. Dispose of used oil and filter properly.
2.12
NOTE
ENGINE CRANKCASE BREATHER HOSE
INSPECTION
The engine crankcase is equipped with a breather hose.
Inspect the breather hose for possible kinks or wear. The
hose is form fitted for proper fit.
Follow the breather hose
engine intake duct.
Make sure hoses are not kinked or pinched.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
q
from the crankcase to the
NOTE
© Copyright Polaris Industries Inc.