Polaris RZR XP 1000 2014 Service Manual page 480

ELECTRICAL
q Vehicle Speed Display - Analog display of vehicle speed in MPH or km/h.
Information Display Area - Odometer / Trip Meter / Tachometer / Engine Temperature / Engine Hours
w / Service Info / Clock - LCD display of the service hour interval, total vehicle miles or km., total engine
hours, a trip meter, engine RPM and engine temperature.
MPH / KM/H Display - MPH is displayed when the instrument cluster is in the Standard mode. KM/H is
e
displayed when the instrument cluster is in the Metric mode.
r High Beam Indicator - LED icon illuminates whenever the Headlamp switch is in the high beam position.
Fuel Level Indicator - LCD bar graph indicating current fuel level. All segments will flash when the fuel
t
level is very low.
y Clock - Displays current time in either 12-hour or 24-hour formats.
Engine Temperature Indicator - LED icon illuminates when the ECM determines the engine is
u overheating. The indicators will initially flash to indicate the engine is overheating. The indicators will stay lit
and not flash if a severe overheating condition exists.
Service Interval Indicator - Preset at the factory and adjustable by the user, a flashing wrench symbol
i alerts the operator that the preset service interval has been reached and maintenance should be
performed. The wrench icon will flash for 10 seconds upon start-up once it reaches 0.
Check Engine MIL - Illuminated when the ECM has detected a Diagnostic Trouble Code in the engine
o
management system.
a AWD Indicator - Illuminated when the AWD / 2WD switch is in the AWD position.
Differential Unlocked Indicator - If equipped with Turf Mode, will illuminate when the AWD switch is in
s
Turf mode..
Neutral Gear Indicator - LED icon illuminates when gear selector is in the neutral (N) position.
d
Gear Position Indicator - Displays gear selector position.
P = Park
R = Reverse
f
N = Neutral
H = High Forward Gear
L = Low Forward Gear
– = Gear Signal Error (shifter stuck between gears)
Power Steering System MIL - LED icon illuminates when a fault has occurred in the EPS system. This
g
indicator also turns on momentarily when the key is turned on.
Turn Signal / Hazard Lamp Indicator - If equipped with turn signals, the LED icon illuminates whenever
h
the left, right or hazard blinker is activated.
Helmet / Seat Belt Indicator - LED icon illuminates for several seconds when the key is turned to the ON
j position as a reminder for the riders to properly use safety equipment. The lamp stays illuminated until the
driver's seat belt is properly latched.
k Hours Indicator - Illuminates when Hours are being displayed on the Information Display
l Mode Button - Used to move through the menu features.
11.6
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.