Polaris RZR XP 1000 2014 Service Manual page 106

ENGINE / COOLING SYSTEM
19. Remove the six fasteners that attach the exhaust
head pipe to the engine. Remove the two exhaust
i
springs that attach the head pipe
Remove exhaust head pipe towards the front of the
vehicle. Discard exhaust gaskets
20. Remove the four fasteners retaining the box support
s
and the two fasteners retaining the box support
d
bracket . Remove the push rivet that attaches the
f
heat shield to the rear cross member.
3.28
21. Place a suitable drain pan under the vehicle and
o
to the muffler.
a
.
22. Use an overhead or portable engine hoist and
23. Remove the four rear mounting bolts
remove the thermostat housing coolant hose
the water pump coolant hose
Dispose of engine coolant properly.
suitable engine straps to secure engine in its current
position.
the rear of the engine to the transmission.
NOTE
It is not necessary to remove the bolts that retain the
k
bracket to the transmission.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
g
and
h
from the engine.
j
that attach
© Copyright Polaris Industries Inc.