Polaris RZR XP 1000 2014 Service Manual page 297

17. Install the idler gear shaft assembly
2*
assembly , and input shaft assembly
transmission housing, all at the same time.
18. Install the rear output shaft assembly
19. Assemble the shift shaft
disassembled.
NOTE
Both shift forks need to be orientated the same way, so
that the shift fork pins are both offset to the same side
of the rail.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
2&
, gear cluster 20. Install the shift shaft rail
2 (
into the transmission housing as an assembly. Be sure the
shift forks are engaged into the engagement dogs.
3)
.
Shift fork pins should be offset towards the input shaft
21. Inspect the shift drum for any damage or wear.
Inspect the splines of the shift drum.
rail if previously
TRANSMISSION
3!
and shift forks into the
NOTE
3@
as shown above .
6
6.27