Fuel Injector Test; Fuel Injector Replacement - Polaris RZR XP 1000 2014 Service Manual

Table of Contents

Advertisement

FUEL INJECTOR TEST

NOTE
Take note of PTO and MAG fuel injector harness
connectors before disconnecting them. The harness
leads are marked with PTO and MAG identifiers.
The fuel injectors are non-serviceable. If diagnosis
indicates a problem with either injector, test the
resistance of the fuel injector (s) by measuring between
w
the two pin terminals
:
Fuel Injector Resistance Specification:
11.4 - 12.6 Ω
NOTE
Be sure to connect the PTO harness lead to the PTO
injector and the MAG harness lead to the MAG injector
to ensure proper engine operation.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.

FUEL INJECTOR REPLACEMENT

1. Remove the cargo box assembly (see Chapter 10 –
Cargo Box Assembly Removal, page 10.22).
2. Be sure the engine has cooled enough to work on.
3. Loosen the hose clamps
w
plenum
to the throttle body.
4. Remove the two screws
plenum.
5. Remove the driver's seat and disconnect the
negative battery cable.
FUEL SYSTEM
q
retaining the intake
4
e
retaining the intake
4.13

Advertisement

Table of Contents
loading

Table of Contents