Polaris RZR XP 1000 2014 Service Manual page 130

ENGINE / COOLING SYSTEM
10. Use one of the oil pump retaining bolts or a pen
magnet to extract the dowel pins
pump. Doing so allows for oil pump removal without
having to remove the pump drive sprocket.
If unable to extract the dowel pins from the oil pump,
the oil pump sprocket must be removed. Access the
sprocket bolt by removing the case plug.
11. Lift the oil pump drive chain and remove the oil
pump.
3.52
s
from the oil
NOTE
12. Visually inspect the oil pump and drive sprocket
for wear or damage. Replace oil pump drive chain
and sprocket if worn or damaged. If any part of the oil
pump is damaged, the entire assembly must be
replaced. Replace the oil pump seal
crankcase assembly.
Oil pump assembly is non-serviceable
13. Rotate the engine so the cylinder is facing up.
14. Remove the eleven M6
crankcase bolts.
15. Rotate the engine so the cylinder is facing down.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
f
NOTE
g h
and two M8
© Copyright Polaris Industries Inc.
d
during
upper