Cooling System Pressure Test; Cooling System Hoses - Polaris RZR XP 1000 2014 Service Manual

8. Fill recovery bottle to MAX level with recommended
coolant or 50/50 or 60/40 mixture of antifreeze and
distilled water as required for freeze protection in
your area.
Recommended Coolant:
Polaris 50/50 Extended Life Anti-freeze
2880514 (quart)
2880513 (gallon)
9. Reinstall the recovery bottle cap.
10. If coolant was required, start engine and check for
leaks. Make sure radiator fins are clean to prevent
overheating.

COOLING SYSTEM PRESSURE TEST

Refer to Cooling System Specifications, page

COOLING SYSTEM HOSES

1. Inspect all vehicle hoses for cracks, deterioration,
abrasion or leaks. Replace if necessary.
q
Recovery Bottle
w
Engine Hoses
e
Radiator Hoses
r
To Thermostat Housing
t
To Water Pump
y
To Radiator
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
2. Inspect all engine hoses for cracks, deterioration,
abrasion or leaks. Replace if necessary.
.
u
Bypass Hose
i
Water Pump Outlet Hose
o
Oil Cooler Inlet Hose
a
Oil Cooler Outlet Hose
3. Check tightness and condition of all hose spring
clamps. Replace if necessary.
MAINTENANCE
2
2.17