Front Drive Shaft Installation - Polaris RZR XP 1000 2014 Service Manual

FRONT DRIVE SHAFT INSTALLATION

q
1. Install new spring ring
anti-seize compound to the splines
2. Align splines of drive shaft with front gearcase and
reinstall the drive shaft. Use a rubber mallet to tap on
the outboard end of the drive shaft if necessary
3. Install drive shaft into the front bearing carrier.
4. Install the upper and lower ball joint ends into the
front bearing carrier.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
5. Install new pinch bolts and nuts
on drive shaft. Apply an
w
.
6. Apply Anti-Seize to drive shaft axle splines.
7. Install front wheel hub assembly
specification.
TORQUE
Ball Joint Pinch Bolts:
42 ft-lbs (57 Nm)
t
, and hand tighten the castle nut. Install washers
with domed side out.
FINAL DRIVE
e
. Torque to
r
, cone washers
7
7.13