Steering Wheel Removal; Power Steering Unit Removal - Polaris RZR XP 1000 2014 Service Manual

STEERING / SUSPENSION

STEERING WHEEL REMOVAL

1. Remove the upper steering shaft, pivot tube and
steering wheel as an assembly before attempting to
remove the steering wheel. Refer to Upper Steering
Shaft Removal, page 8.5.
CAUTION
Striking the steering wheel or steering shaftwhile
installed in the vehicle can permanently damage the
EPS unit and cause aPower Steering Fault.
2. Remove the steering wheel cap.
3. Loosen the nut and back it half way off the steering
shaft.
4. Place the assembly in a vise.
5. Using a large bronze drift and hammer, strike the
steering shaft nut to pop the steering wheel off the
shaft taper.
6. Once the steering wheel pops loose, completely
remove the nut and lift the steering wheel off the
shaft.
8.6

POWER STEERING UNIT REMOVAL

1. Remove the upper steering shaft, pivot tube and
steering wheel from the vehicle as an assembly.
Refer to Upper Steering Shaft Removal, page 8.5.
CAUTION
Striking the steering wheel or steering shaft while
installed in the vehicle can permanently damage the
EPS unit and cause a power steering fault.
2. Disconnect the two electrical harnesses
power steering unit .
3. Remove the pinch bolt
shaft to the power steering unit .
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
q
from the
w
retaining the lower steering
© Copyright Polaris Industries Inc.