Polaris RZR XP 1000 2014 Service Manual page 283

a
8. Remove the spacer .
s
9. Remove the shift shaft , detent pawl
f g
sector gears and .
NOTE
Note the timing marks on the shift gears for reassembly
purposes.
h
10. Remove the O-rings from each shaft and discard.
Use new O-rings upon assembly.
11. Remove all the transmission case bolts. Using suit-
able pry bars, remove the cover using the designated
pry points (indicated by the black arrows in the illus-
tration below).
CAUTION
Do not pry on case sealing surfaces.
Use only the designated pry points on the
transmission.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
12. Lift up on the shift shaft rail
assembly rearward to allow the shift fork pins
d
and the shift
removed from the shift drum
drum from the transmission housing.
13. Remove the shift shaft rail
transmission housing as an assembly.
14. Remove the rear output shaft assembly
underneath the gear or by tapping the shaft from the
opposite side.
TRANSMISSION
j
and move the rail
k
to be
l
. Remove the shift
j
and shift forks from the
1 (
by lifting
6.13
6