VERSION 02/2018
OPERATING MANUAL
10.3 MOUNTING MATERIALS
In Chapter
14
the order numbers for device spare parts can be found, as well as for wearing
parts such as seals.
Use torques, greases and glues in accordance with Chapter 14. Spray gun in accordance
with Chapter 10.4.
Mounting materials
Order No.
Quantity
1 pc ≙ 50 ml
9992511
1 pc ≙ 50 ml
9992831
1 pc ≙ 150 g
9992528
1 pc ≙ 1 kg can
9992616
1 pc ≙ 200 g can
9992698
353702
10 ml; 10 cc
Brand notice
The brands specified in this document are property of the respective owners. Loctite®, for
example, is a registered brand of Henkel.
10.4 SPRAY GUN
Plastic parts
Gently handle all plastic parts.
10.4.1 TOOLS
For disassembling and assembling the spray gun, the following tools are required:
– Allen wrench, SW 2
– Allen wrench, SW 3
– Allen wrench, SW 5
– Wrench, SW 5
– Wrench, SW 6
– Wrench, SW 8
– Wrench, SW 11
– Wrench, SW 12
– Wrench, SW 14
– Wrench, SW 19
– Ring spanner, SW9
– Ring spanner, SW11
ORDER NUMBER DOC 2366717
Designation
Loctite® 243
Loctite® 542
Loctite® 270
Molykote® DX grease
Vaseline white, PHHV II
High-voltage oil
– Torx® wrench 20
– Torx® wrench 25
– Screwdriver No. 1
– Slide gauge
– Valve needle assembly tool,
Order No. 2309368
– Clamping screw assembly tool,
Order No. 2325263
Only as required:
– Handle seal assembly tool
(Order No. 2342334, not included in
scope of delivery)
Smaller tanks
50 g tube ≙ Order No. 2355419
83