Table of Contents
Advertisement
EDITION 05/2011
OPERATING MANUAL
4
DESCRIPTION
4.1
FIELDS OF APPLICATION, USING IN ACCORDANCE WITH THE INSTRUCTIONS
The gun is suitable for atomising liquid materials, particularly coating materials, using the AirCoat process.
4.1.1
PROCESSIBLE MATERIALS
Top-coat paints, primer paints, corrosion protection solvents, textured paints, lyes, staining solvents, clear paints,
parting solvents, etc. on a solvent or water basis. If you want to spray other working materials than the afore-
mentioned, turn please to a Wagner agency.
Hot coating substances!
Burns
SIHI 0019 GB
Note: In the event of application problems consult your Wagner branch and/ or the paint
manufacturer.
4.2
SCOPE OF DELIVERY
These AirCoat gun is available in two different variants. The nozzle size depends on the paint and on the ap-
plication. Therefore the air cap and the nozzle are not included in the scope of supply. For a gun accessories
look in chapter 9.
4.2.1
VARIANT FOR APPLICATION RANGE UP TO 16 MPA; 160 BAR; 2320 PSI
Qty
Part No.
1
394004
4.2.2
VARIANT FOR APPLICATION RANGE UP TO 25 MPA, 250 BAR, 3625 PSI
Qty
Part No.
1
394014
1
2303491
4.2.3
STANDARD EQUIPMENTS
The standard equipment includes:
394004
394014
Qty
Qty
1
1
1
1
1
1
For special versions the delivery note applies.
Part No. DOC394861
Wear antistatic protective gloves.
When operating the unit with a coating material with a temperature
greater than 43 °C; 109.4 °F: Identify the unit with a warning sticker
"Warning - hot surface".
Description
GM 4600AC 16 MPa; NPSM 1/4" Paint connection
Description
GM 4600AC 25 MPa ; NPSM 1/4" Paint connection
GM 4600AC-H 25 MPa ; NPSM 1/4" Paint connection
AirCoat hand gun GM 4600AC
Part No.
Description
394891
CE-conformity
394860
Operating manual German
see chap. 1
Operating manual for the other language
WARNING
GM 4600AC
12
Advertisement
Table of Contents
