Correct Use; Device Type; Type Of Use; Field Of Application - WAGNER AquaCoat 5010 GM 5020EAW Operating Manual

Air spraying system for non-ignitable liquids
Table of Contents

Advertisement

VERSION 02/2018
OPERATING MANUAL
2

CORRECT USE

2.1

DEVICE TYPE

Electrostatic spraying unit for manual coating of grounded work pieces. The system is
suitable for air-atomizing applications.
The system is equipped with the AquaCoat 5010/5020 cabinet, the VM 5020W control unit, a
GM 5020EAW spray gun and matching hose set, a high-voltage generator, all safety devices
and one of the following spray product supplies:
- Double diaphragm pump, TOPFINISH DD10 (in accordance with the spare parts catalog)
- Double diaphragm pump, ZIP52 GHSS7 (in accordance with the spare parts catalog)
2.2

TYPE OF USE

AquaCoat 5010/5020 GM 5020EAW can be used to spray liquid, non-ignitable products, in
particular non-ignitable coating products in accordance with Chapter 2.4.
WAGNER explicitly prohibits any other use!
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WAGNER.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
Follow the instructions in the operating manual.
2.3

FIELD OF APPLICATION

The device is not suitable for use in potentially explosive areas.
(See Chapter 3.1"CE Identification".)
ORDER NUMBER DOC 2366717
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aquacoat 5020 gm 5020eaw

Table of Contents