Correct Use; Device Type; Type Of Use; Use In Potentially Explosive Areas - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2012
OPERATING MANUAL
2

CORRECT USE

2.1

DEVICE TYPE

Automatic spray gun for automatic coating
2.2

TYPE OF USE

The spray gun PEA-C4-HiCoat serves as stationary equipment for industrial electrostatic
coating with fl ammable powder in automatic systems. It can be operated either with
single control units or switch cabinet modules.
2.3

USE IN POTENTIALLY EXPLOSIVE AREAS

This type A-P electrostatic powder spray gun is suitable for processing industrial powder
paints for coating electrically conductive objects and can be used in potentially explosive
atmospheres (zone 22). (See explosion protection identifi cation Chap 3.1).
2.4

SAFETY PARAMETERS

The powder spray gun is only suited to the application of powder paint.
J. Wagner AG forbids any other use!
The powder spray gun may only be operated under the following conditions if:
the operating staff have previously been trained on the basis of this operating manual,
the safety regulations listed in this operating manual are observed,
the operating, maintenance and repair information in this operating manual is
observed,
and the statutory requirements and accident prevention regulations standard in the
country of use are observed.
The spray gun may only be used if all parameters are set and all measurements/safety
checks are carried out correctly.
ORDER NUMBER DOC 390829
PEA-C4-HiCoat
8