Adaptor / Convertor / Maintenance Tool - Fujitsu AIRSTAGE J-III L AJ 072LELAH Series Design & Technical Manual

1-4. ADAPTOR / CONVERTOR / MAINTENANCE TOOL

Network Convertor
Split type systems can be
controlled from a central controller
via the convertor.
KNX Convertor for VRF
For connection between VRF
network system and a KNX open
network.
®
Modbus Convertor for VRF
For connection between VRF
network system and a Modbus
open network.
Network Convertor
Split type systems can be
controlled from a central controller
via the convertor.
Group remote controller can be
controlled up to two refrigerant
systems via the convertor.
®
BACnet Gateway (Hardware)
For connection between VRF
network system to the BMS
system using BACnet
Supports max.128 indoor units.
Model : UTY-VTGX
Model : UTY-VKGX
Model : UTY-VMGX
®
Model : UTY-VGGXZ1
Model : UTY-VBGX
®
protocol.
- (01 - 08) -
Network Convertor (AC power supply)
Split type systems can be
controlled from a central controller
via the convertor.
KNX Convertor for Indoor Unit
For connection between Single
split indoor unit
and a KNX open network.
®
Modbus Convertor for Indoor Unit
For connection between Single
split indoor unit and a Modbus
open network.
Network Convertor for L
For connection between
VRF network system and a
L
ON
management of small to medium-
sized BMS.
®
BACnet Gateway (Software)
The central control of maximum
1600 indoor units can be realized
by connecting the VRF network
system to the BACnet
standard for open network.
Model : UTY-VTGXV
Model : UTY-VKSX
Model : UTY-VMSX
®
®
W
ON ORKS
Model : UTY-VLGX
®
W open network for
ORKS
Model : UTY-ABGXZ1
®
, a global