Ventilation And Clearance; Instrument Layout; Input And Control Panel; Figure 2-1. Control/Display And Input Panel (Shown With Model T750 Label) - Teledyne T750 User Manual

4. Check the line voltage and frequency label on the instrument to ensure that it
V
2.2.
ENTILATION AND
Always keep portable calibrator's lid open to vent while operating.
Do not block vent grills.
I L
2.3.
NSTRUMENT AYOUT
I
NPUT AND
Figure 2-1 shows the location of the Input and Control Panel components. The two USB
ports are provided for connecting customer-supplied peripheral devices such as a mouse as
an alternative to touching the control interface, and/or a flash drive to download
software/firmware updates.
Figure 2-2 shows the display screen, the orientation to which is described in Section 3.2.1,
Figure 3-1. (The Communications and Output panel is presented in Section 2.3.2).

Figure 2-1. Control/Display and Input Panel (shown with Model T750 label)

20
matches the local power source.
C
LEARANCE
C P
ONTROL ANEL
083730750B DCN8606