Chapter 2 Operating The Library; Using The Operator Panel - Fujitsu ETERNUS LT260 User Manual

Chapter 2
Operating the Library
The library provides two main interfaces:
• Operator panel
With the operator panel, you can monitor, configure, and control the library from the front panel. All oper-
ating menus are displayed on the center pane.
• Remote panel
With the remote panel, you can monitor, configure, and control the library from a web browser. The remote
panel hosts a dedicated, protected Internet site that displays a graphical representation of the library.
Except of top menus, operating menu tree are displayed on the right pane.
The operator panel and remote panel are similar in design and functionality.
Table 2.1
2.1

Using the Operator Panel

The front panel has a power button, an LCD touch screen, and five LEDs. With the operator panel you can
monitor, configure, and operate most library functions from the front panel. To navigate the operator panel,
tap on the LCD touch screen.
Table 2.2
Module ID
Ready
Clean
Attention
Error
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
Status icons
The green Status OK icon indicates that the library is fully operational and that no user interaction is
required.
The yellow exclamation point Status Warning icon indicates that user attention is necessary, but
that the device can still perform most operations.
The red X Status Error icon indicates that user intervention is required and that the device is not
capable of performing some operations.
Front panel LED indicators
Blue when activated. The unit identification (UID) LEDs are controlled by the user through the
operator panel and remote panel Maintenance > UID LED Control screen. The UIDs on the operator
panel and back panel UID are activated and deactivated together. The UIDs are helpful for locating
the library in a data center.
Green, steady when power is on, blinking with tape Ready drive or library robotic activity.
Amber when a tape drive cleaning operation is recommended.
Amber if the library has detected a condition for which user attention is necessary, but that the
library can still perform most operations.
Amber if an unrecoverable tape drive or library error occurs. A corresponding error message is dis-
played on the LCD screen. User intervention is required; the library is not capable of performing
some operations.
16
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0