Cleaning Cartridge That Can Be Used - Fujitsu PRIMERGY LTO3 User Manual

If a cleaning cartridge that has been used too many times is inserted, the Tape Error LED
will turn on and the cleaning cartridge will be ejected in about 20 seconds. If before cleaning
the CleanLED starts blinking to request cleaning, the Clean LED will stay blinking. Insert a
new cleaning cartridge. If cleaning is successfully completed the Tape Error LED and Clean
LED will turn off.
4.2

Cleaning Cartridge that can be Used

Use the following cleaning cartridge for this product.
Ultrium Universal Cleaning Cartridge (LTO FB UL-1 CL UCC E)
The Clean LED blinks on when cleaning is required. Clean using the cleaning cartridge.
The cleaning cartridge can be used 50 times maximum. Five years after purchasing the
cleaning cartridge, replace it with a new one even if it has been used less than 50 times.
Use the label attached to the cleaning media to manage the number of times for its use.
Even if a cleaning cartridge that exceeded the maximum times it can be used is set,
cleaning will not take place (the cleaning cartridge will be ejected in about 20 seconds).In
this case, replace the cleaning cartridge with a new cartridge and try again.
Product name
Starting date: Jan 1 2006
Times used:
<Example of Cleaning cartridge label
Can be used maximum of 6 times>
Supplier
FUJI PHOTO FILM Co.,LTD.
E
75
4 Cleaning