Setting The Eternus Dx/Af; Figure 11 Eternus Af Series, Eternus Dx S5/S4/S3 Series - Fujitsu ETERNUS AF Series Configuration Manual

All-flash arrays, hybrid storage systems, disk storage systems, power synchronized unit

Hide thumbs Also See for ETERNUS AF Series:

Table of Contents

Connection and Settings

Setting the ETERNUS DX/AF

Perform the necessary settings for power synchronization by using the setting and maintenance program of the

ETERNUS DX/AF.

If the power synchronized unit and the ETERNUS DX/AF storage system are connected with a redundant configu-

ration, the operations during a power down are as follows:

•

For the ETERNUS AF series and ETERNUS DX series (excluding the ETERNUS DX900 S5, ETERNUS DX8900 S4,

and ETERNUS DX8700 S3/DX8900 S3)

When the controllers for CM#0 and CM#1 both receive shutdown instructions, the shutdown process starts.

•

For the ETERNUS DX900 S5, ETERNUS DX8900 S4, and ETERNUS DX8700 S3/DX8900 S3

When the Service Controllers (SVC) for SVC#0 and SVC#1 both receive shutdown instructions, the shutdown

process starts.

■ ETERNUS AF series, ETERNUS DX S5/S4/S3 series (excluding ETERNUS DX900 S5, ETERNUS

DX8900 S4, and ETERNUS DX8700 S3/DX8900 S3), and ETERNUS DX200F

This section explains the setting items on the power synchronization setting screen.

Figure 11

ETERNUS AF series, ETERNUS DX S5/S4/S3 series (excluding ETERNUS DX900 S5, ETERNUS DX8900

S4, and ETERNUS DX8700 S3/DX8900 S3), and ETERNUS DX200F setup (Setup Power

Management screen)

•

Auto Power

Select "Disable".

•

Power Resume

Select "Disable".

FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)

P3AM-8012-14ENZ0

Table of Contents