Figure 7.10 [Setup Network Environment] Screen - Fujitsu Eternus DX60 User Manual

Chapter 7 Setup
7.2 Basic Setup
7-2
•
•

Figure 7.10 [Setup Network Environment] screen

A confirmation screen appears.
Click the [OK] button.
The Network Environment is set, and the [Finish] screen appears.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
Disabling unused protocols is a standard security measure. If
the following "Interface" fields are set to "Disable", network
access to the ETERNUS DX60/DX80/DX90 via the services
that use these protocols is blocked.
- "http", "https"
To block GUI access.
- "telnet", "SSH"
To block CLI access.
- "Maintenance", "Maintenance-Secure"
To block monitoring software access.
- "ICMP"
To block "ping" requests.
The appropriate IP address or network address must be set in
the "Allowed IP List" to allow access to an ETERNUS DX Disk
storage system that is in a different network address than the
ETERNUS DX60/DX80/DX90. ETERNUS DX Disk storage
systems in the same network address as the ETERNUS
DX60/DX80/DX90 are allowed access even if not set in the
"Allowed IP List".
149
P3AM-3042-08ENZ0