Library Information - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Operating the Library
2.8 Viewing Status Information
■

Library information

• Vendor
• Serial Number
Library serial number
• Robotic Hardware Revision
• Barcode Reader Hardware Revision
• WWide Node Name
A worldwide unique identifier that the library reports over SCSI and can be used by operating systems or
software applications to identify and track the library.
• Product ID
• Firmware Revision
Version of the currently installed library firmware
• Robotic Firmware Revision
Version of the currently installed robotic assembly firmware. The robotic assembly firmware is bundled and
installed with the library firmware.
• Barcode Reader Firmware Revision
Version of the currently installed barcode reader firmware. The barcode reader firmware is bundled and
installed with the library firmware.
■ Library Status
• Library Status
- Idle
The library robotic is ready to perform an action.
- Moving
The library robotic is moving a cartridge.
- Scanning
The library robotic is performing an inventory of cartridges.
- Offline
The library robotic has been taken off line by the library.
• Cartridge in Transport
When applicable, displays the barcode label of the cartridge currently in the robotic assembly.
• Total Power On Time
Total time that the base module has been powered on since it was manufactured
• Odometer
Robotic assembly move count
• Robotic Location
Displays the module where the robotic is currently located.
• Shipping Lock
Indicates whether the robotic is unlocked or locked for shipment.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
69
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0