MUTOH DrafStation User Manual page 66

Windows - Network installation procedure
Step Action
Verify that :
•
The PC and plotter
are connected to
the network. See
"Connecting
1
network interface
cable"
•
The PC and the
plotter are switched
ON.
Insert the driver CD in
the CD drive of the PC
OR run the setup.exe
file in the Windows
plotter software folder.
2
Notes
When the Installer does
not automatically start,
execute "Setup.exe" on the
CD-ROM.
Select the model in
screen 1, and click
3
"Install".
Click the check box
"Installation of a driver"
4
in screen 2, and click
"Next>".
The software initializes.
Screen 1
Screen 2
66
User's Guide DrafStation and Drafstation Pro
Screen
-
Chapter 3: Basics
11 steps - Step 1 to 4
Result
-
The display
moves to
screen 1 of the
Mutoh printer
driver program.
The display
moves to
screen 2.
The display
moves to
screen 3.
AP-75730, Rev. 2.1, 19/01/2009