Operation Procedure Labels; Handling The Operation Procedure Labels; Locations And Types Of Warning Labels - MUTOH DrafStation User Manual

1.5 OPERATION PROCEDURE LABELS

In this section, the handling, location and types of the operation procedure labels are explained. Operation
procedure labels contain items which the operator must be particularly careful while operating the plotter.

1.5.1 Handling the operation procedure labels

Be careful about the following points, when handling the operation procedure labels.
Notes
•
Check whether all operation procedure labels are readable. If the letters or illustrations on the labels
are not clear, remove the dirt from the label.
•
Use cloth, water and neutral detergent for removing dirt from an operation procedure label. Avoid using
either organic solvents or gasoline.
•
It is necessary to replace the labels if they are damaged, lost or illegible.
If the operation procedure labels have to be replaced, contact your local MUTOH dealer.

1.5.2 Locations and types of warning labels

N° Types of operation procedure labels
1
2
3
4
User's Guide DrafStation and Drafstation Pro
"Loading roll media"
"Loading sheet media"
"Replacing the cutter blade"
"Replacing ink cartridges"
15
Chapter 1 :Safety information
Reference
AP-75730, Rev. 2.1, 19/01/2009