Printing Flow - MUTOH DrafStation User Manual

5.5 PRINTING FLOW

The following flowchart gives you a view on which steps must be taken to make a print.
P
ERFORM
D
ECIDE WHICH WEAVING PATTERN SHOULD BE USED
∗
It is highly recommended to use one of the profiles Mutoh is making available on the website. A lot of parameters are included.
The most important ones are:
Ink an colour management related
•
Ink Restrictions
•
Linearization
•
Ink limits
• ICC Profile
The file name of each profile is build up in the same way
For example
S
ELECT MEDIA
(Refer to the media compatibility lists on www.mutoh.be)
L
OAD MEDIA
(Refer to the chapter "Loading Media")
N C
OZZLE HECK AND CLEANINGS IF NECESSARY
(Refer to the chapter "TestPrinting")
S
(Refer to chapter "Set the correct distance adjust")
S
ELECT IMAGE
L
OAD DEDICATED PROFILE
(Refer to profiles section on www.mutoh.be)
(Refer to chapter "I² technology")
P
RINT IMAGE
PrintMode related
•
Resolution
•
Amount of passes
•
Unidirectional – Bi Directional
• Weaving ON – OFF
User's Guide DrafStation and Drafstation Pro
Chapter 5: Preparations before printing
▼
▼
▼
ET STEP
▼
▼
(∗)
AND RIP IMAGE
▼
▼
Media related
•
•
•
111
( / )
SIGN PICTURE
Heater settings
Media thickness
HeadHeight
AP-75730, Rev. 2.1, 19/01/2009