MUTOH DrafStation User Manual page 109

Step 9 : Set up the Micro Adjustment Change.
•
Press the [+] key or [–] key to select "PF: Micro Change".
• Press the [Enter] key on the operation panel.
o
•
Press the [+] key or [–] key and enter the micro adjustment value according to the printing
result in step 7.
•
Press the [Enter] key on the operation panel.
Saves the micro adjustment value.
o
The operation panel displays "PF: Micro.Change".
o
The Media feed compensation is complete.
o
Step 10 : Set up the confirm print menu.
•
Press the [+] key or [–] key to select "PF: Confirm Print".
•
Press the [Enter] key on the operation panel.
•
The printer will print a confirmation pattern.
Check if the step adjustment is OK for you, if so you can start with your printing operation. If the media feed
compensation is still not correct, you can adjust via the micro adjust menu.
The operation panel displays "Micro: 0pulse".
User's Guide DrafStation and Drafstation Pro
Chapter 5: Preparations before printing
109 AP-75730, Rev. 2.1, 19/01/2009