MUTOH DrafStation User Manual page 139

Step 4 : Pull the media to your side, and cut the torn part with a cutter blade (1).
Step 5 : Lift both end of the scroller (2), and guidely rewind the roll media (1).
Step 6 : Remove all other remaining paper pieces in the plotter.
Step 7 : If errors requiring a restart occur, switch off the plotter, and switch it on again.
N°
1 Cutter blade
2 Roll media
N°
1 Roll media
2 Scroller
139
User's Guide DrafStation and Drafstation Pro
Name
Name
Chapter 7: Troubleshooting
AP-75730, Rev. 2.1, 19/01/2009