Table of Contents
Advertisement
Step 1 :
Remove the movable flange from the scroller.
Step 2 :
Install the optional three-inch core adapters :
•
If using media on a 2 inch core: Don't use the three-inch core adapters, go to step 3.
•
If using media on a 3 inch core : Click a three-inch core adapter (3) on the fixed flange (2) and
the movable flange (1) as shown on the image below.
Step 3 :
Put the roll media on the scroller. See image below for the correct roll direction.
Printable side outside
N°
1
Movable flange
2
Fixed flange
3
Three-inch core adapter
36
User's Guide DrafStation and Drafstation Pro
Name
Chapter 3: Basics
AP-75730, Rev. 2.1, 19/01/2009
Advertisement
Table of Contents
Troubleshooting
