MUTOH DrafStation User Manual page 52

Notes
• When replacing ink cassettes on the Drafstation Pro, be aware to insert the same ink cassettes as
those who were in previous.
• If you insert the second configuration without performing a cleaning, the printer will be defected.
•
When you want to switch from 1 configuration to another, you need 4 cleaning cassettes RJ9-22-CLN.
And you need to contact your local Mutoh dealer to perform the necessary cleaning.
Notes
•
Only use Mutoh original ink.
This plotter has been developed for use of genuine ink cartridges. In case of using non genuine ink
cartridges, notice the following :
Printing might become blurred and the end of ink in the cartridge might no longer be correctly
o
detected.
The problems caused by doing so will not be covered by the warranty and repair expenses will
o
have to be paid by the customer.
•
For types and details of ink cartridges refer to "Options/Supplies. "
• When moving an ink cartridge from a cold place to a warm place, keep the ink cartridge unused for
three hours or more in the printing environment.
(3) Replacement steps
Notes
• Do not shake ink cartridges. This could cause ink leakage.
•
When moving an ink cartridge from a cold place to a warm place, keep the ink cartridge unused for
three hours or more in the printing environment.
•
Do not refill the ink cartridges.
Doing so may result in incorrect printing.
•
Insert or remove the ink cartridge at the time of replacement only.
Inserting or removing ink cartridges except at the time of replacement may result in incorrect printing.
User's Guide DrafStation and Drafstation Pro
52
Chapter 3: Basics
AP-75730, Rev. 2.1, 19/01/2009