MUTOH DrafStation User Manual page 58

Step 3 : Install a new waste fluid tank (1) in the plotter as shown on the image below.
Step 4 : Verify that the operation panel displays "Exchange Tank? No".
Step 5 : Select "Yes", and press the [Enter] key on the operation panel.
Notes
• In case of pulling out the waste fluid tank accidentally, press the [Enter] key on the operation panel
when "Exchange Tank? No" is being displayed.
N°
1 Waste fluid tank
58
User's Guide DrafStation and Drafstation Pro
Name
Chapter 3: Basics
AP-75730, Rev. 2.1, 19/01/2009