Table of Contents
Advertisement
2.5.2 Installation space
(1) When using the Drafstation or the Drafstation Pro with the stand.
Install the plotter on a levelled floor which has enough strength to support the weight of the plotter and the
stand.
(2) When using the plotter only (RJ-901C only)
Install the plotter on a levelled table which has fulfils the following conditions:
•
The table is strong enough to support the weight of the plotter.
•
The required length for the sheet media is available at the back of the machine.
•
The height from the floor is 600 mm to 800 mm.
•
The space in the front is more than 300 mm.
User's Guide DrafStation and Drafstation Pro
32
Chapter 2 :Product Overview
AP-75730, Rev. 2.1, 19/01/2009
Advertisement
Table of Contents
Troubleshooting
