4.1.3 Cleaning inside the plotter
To clean inside the plotter, follow the steps below.
Step 1 :
Open the front cover (1).
Step 2 :
Remove paper powder and dust from the pressure rollers (1), using a soft brush.
Notes
•
Do not blow paper powder inside the plotter. Doing so will cause abnormal noise inside the plotter.
Step 3 :
Wipe off paper powder and ink from the printing board (1) using a dust-free and soft cloth slightly
damped with water.
N°
1
Front cover
N°
1
Pressure rollers
N°
1
Printing board
93
User's Guide DrafStation and Drafstation Pro
Chapter 4: Periodical maintenance
Name
Name
Name
AP-75730, Rev. 2.1, 19/01/2009