MUTOH DrafStation User Manual page 74

Win - USB installation procedure - Part 2 - WinXP / PnP mode
Step Action
Verify that :
the plotter and printer are
switched ON,
the Mutoh Driver CD is
inserted in the
1
CD-ROM drive of the PC,
and the Mutoh installer
(Part 1) has been
finalized.
Connect the plotter to the
2
PC with the USB cable.
Mark the checkbox "No,
not this time" in screen 1,
3
and click on "Next>".
Mark the checkbox "Install
from a list or specific
location (Advanced)" in
4
screen 2, and click on
"Next>"
Screen 1
Screen 2
74
User's Guide DrafStation and Drafstation Pro
Screen
-
-
Chapter 3: Basics
12 steps - Step 1 to 4
Result
-
The display
moves to
screen 1 of the
"Found New
Hardware
Wizard".
The display
moves to
screen 2.
The display
moves to
screen 3.
AP-75730, Rev. 2.1, 19/01/2009