MUTOH DrafStation User Manual page 68

Win - Network installation procedure
Step Action
Click "Add Port..." and
go to step 8 to add a
printer port
OR
7
Select a port, click "OK"
and go to step 9 to select
an existing port.
Notes
The RJ-90x Port is
displayed if a port setup has
been performed already in
the past. Select the port
and click "configure port" to
use it.
Select "Mutoh Network
Port" and click "New
8
Port..."
Screen
Screen 5a
Screen 5b
Screen 6
68
User's Guide DrafStation and Drafstation Pro
AP-75730, Rev. 2.1, 19/01/2009
Chapter 3: Basics
11 steps - Step 7 to 8
Result
The display
moves to
screen 6 in
Step 8.
The display
moves to
Screen 7 in step
9.
The display
moves to
screen 7 in
Step 9.