MUTOH DrafStation User Manual page 108

Step 7 : Perform Micro adjustment printing.
• Display the Media feed compensation menu on the operation panel as in step 1.
• Press the [+] key or [–] key to select "PF: Micro Print".
• Press the [Enter] key on the operation panel.
o The operation panel displays "Printing".
o Start Micro adjustment printing.
• After completing the micro adjustment printing, the operation panel displays "PF: Micro Print".
Step 8 : Refer to the illustrations below and check the printing result.
User's Guide DrafStation and Drafstation Pro
Chapter 5: Preparations before printing
108 AP-75730, Rev. 2.1, 19/01/2009