Nozzlecheck - MUTOH DrafStation User Manual

5.2.3 NozzleCheck

Be sure to read and understand the safety warnings before handling the printer.
Used to check whether there is any head clogging, missing nozzles or misfiring nozzles.
Notes
•
If the nozzle check result indicates that the checked points are blurred or missing, clean the head.
Refer to "Head cleaning"
Perform the nozzle check once again after the head has been cleaned.
Notes
•
For the printing procedure, refer to: "Performing a testplot".
User's Guide DrafStation and Drafstation Pro
Chapter 5: Preparations before printing
102 AP-75730, Rev. 2.1, 19/01/2009