Transfer And Transportation; Transferring The Plotter - MUTOH DrafStation User Manual

Full-color inkjet plotter

Table of Contents

3.9 TRANSFER AND TRANSPORTATION

This section describes the transfer and transportation of the plotter.

Be sure to read and understand the safety warnings before handling the printer.

Describes how to transfer the plotter.

When using the dedicated stand, transfer the plotter following the procedure below.

(1) Pre-transfer steps

Step 1 :

Verify that the plotter has been switched OFF.

Step 2 :

Verify that the butterfly bolts attaching the stand with the plotter, are not loosen.

Step 3 :

Verify that the plotter head is in the rightmost position.

Step 4 :

Attach the protective material (metal plate) for attaching the head unit (1), and fix it with

thumbscrews (2).

Step 5 :

Remove the scroller.

Step 6 :

Unplug and remove all cables.

N°

Protective material (metal plate) for attaching

the head unit

Thumbscrew

User's Guide DrafStation and Drafstation Pro

Name

Chapter 3: Basics

AP-75730, Rev. 2.1, 19/01/2009

Table of Contents

Drafstation pro