Maintenancerecordplot - MUTOH DrafStation User Manual

5.2.6 MaintenanceRecordPlot

To check the life cycle status of important parts.
Notes
•
The life cycle status is expressed as a number of * marks for each part (Maximum of five: denoting the
residual life is 100 %).
•
As the life cycle status approaches the end, the number of * marks decreases one by one (20 %).
•
When all * marks have disappeared, the part life cycle has ended. Replace parts referring to :
Cutter blade :
o
Waste fluid tank :
o
Other parts: Contact your local MUTOH dealer.
See "Replacing cutter blade"
See "Replacing waste fluid tank"
User's Guide DrafStation and Drafstation Pro
Chapter 5: Preparations before printing
105 AP-75730, Rev. 2.1, 19/01/2009