MUTOH DrafStation User Manual page 25

(1) Operation keys in the Normal mode
N° Key
1 [Menu]
[Enter]
2
[Cleaning]
[Cancel]
3
[Cut]
4 [Back]
5 [Next]
[Backward feed ↑ ]
6
[Setting value +]
[Forward feed ↓ ]
7
[Setting value-]
8 [Power]
(2) Operation keys in the Menu mode.
N° Key
1 [Menu]
[Enter]
2
[Cleaning]
[Cancel]
3
[Cut]
4 [Back]
5 [Next]
[Backward
feed ↑ ]
6
[Setting value +]
[Forward feed ↓
]
7
[Setting value-]
8 [Power]
Notes
•
For details on how to work with the operation panel, refer to the following topics:
o When working in the Menu mode.
o See "Menu setup on the operation panel"
o When working in the Normal mode.
o See "Operating from the operation panel. "
Changes to Menu mode.
--
Cleans the plotter head when pressed for two seconds or more.
•
During printing: Printing is terminated and the remaining data is deleted.
• During receiving/analysis: Data that has been received and analyzed is
deleted. Data of the next print file will be ignored.
•
Ink dry timer wait: Ink dry timer wait is cancelled and the media is ejected.
Sheets off the roll media.
Sets the media type.
The indication light of media setup (Roll/Sheet) lights up (green).
Sets the printing and colour mode.
The indication lights of print mode (High Speed/Normal/High quality) and set
colour mode (colour/Black&White) light up green.
Feeds the media in reverse direction.
Feeds the media in forward direction.
Switches the plotter ON / OFF.
Shifts from Menu mode to Normal mode.
· Selects a specific menu or submenu.
· To enter and save the value.
· Returns to the previous hierarchy in the menus structure. Changes in the setup
value will not be saved.
· Shifts from the Menu mode to Normal mode.
Goes to the previous menu.
Goes to the next menu.
To increase the numerical value.
To decrease the numerical value.
Switches the plotter ON / OFF.
User's Guide DrafStation and Drafstation Pro
Function.
--
--
Function.
--
--
--
--
25
Chapter 2 :Product Overview
AP-75730, Rev. 2.1, 19/01/2009