Step 4 :
Open the front cover (1). See image below.
Step 5 :
Insert the sheet media (1) into the media feed slot at the front side of the plotter. See image
below.
Step 6 :
Align the right hand side of the sheet to the media loading mark (2), and align the front edge to
one of the platen steps (3). See image below.
Notes
•
Load the media within a ± 5mm range left or right from the loading mark; otherwise a media loading
error will occur.
N°
1
Front cover
N°
1
Sheet media
N°
1
Sheet media
2
Media loading mark
3
Platen step
42
User's Guide DrafStation and Drafstation Pro
Name
Name
Name
Chapter 3: Basics
AP-75730, Rev. 2.1, 19/01/2009