Installing The Windows Plotter Driver For Network Connection - MUTOH DrafStation User Manual

3.10.3

Installing the Windows plotter driver for network connection

Before installing the network connection, the plotter's TCP/IP settings have to be chosen.
•
IP address plotter:
– This is the plotter's IP address.
– Has to be filled out in the plotter AND the plotter driver.
– The PC will send the plot files to this IP address.
•
Subnet mask plotter:
Has to be filled out in the plotter.
•
Gateway plotter:
– This is the PC's IP address or the router's IP address on the plotter side.
– Has to filled out on the plotter.
Notes
• When installing a router between the plotter and the PC, IP forwarding of the plotter's IP address to the
PC is necessary. This to establish bidirectional communication between the plotter and the PC.
Configuration example without router:
IP address PC
168.192.0.50
Subnet mask PC IP address plotter
255.255.255.0
User's Guide DrafStation and Drafstation Pro
Subnet mask plotter
168.192.0.51 255.255.255.0
65
Chapter 3: Basics
Gateway plotter
168.192.0.50
AP-75730, Rev. 2.1, 19/01/2009